China Facemask 3 Ply Earloop Masque Doctor Disposable Medical Face Mask

CE approved high quality disposable China medical supplies face mask is made of 3-layers,inside and outside layers are PP nonwoven,middle layer is high standard N98 filter paper.

Products Advantages

1. Dispsoable plain face mask,Size:17.5x9.5cm,3-PLY.

2. Very low resistance to breathing,free from foreign smell,without any stimulating feeling.

3. Nose bar can be adaptable,comfortable,without glass fibres,latex free.
4. PFE(Filtration efficiency of non oily particles)≥30%.

5. BFE(Bacteria filtration efficiency)≥99%

6. Use ultrasonic welding technology, comfortable wearing.

Indications

1.Sterile products are used for hospital clinical medical personnel and patients.

2.Non-sterile products can be used for dust-free workshop,, hospital, laboratory, food industry, electronic manufactures and so on.

3.To prevent the spread of body fluids and blood splash content and isolate dust, particle, alcohol, blood, bacteria.

Normal packing of medical supplies face mask

Non sterile,10pcs per PE bag,2000pcs(200 bags)/ctn, carton size:52x41x36.5cm

Advantages of disposable masks
Extremely aerated; Toxic gases need to be filtered; Heat preservation is required; Can be soft; Need to breathe; Flexibility; Will shock; Feel very good and quite hard; Compared with other masks, the texture is relatively light; Very elastic and can be reduced by shearing; The price is relatively low, suitable for mass production

There are a variety of disposable dust masks, free choice must be based on different market needs and working conditions.
Should choose freely according to dust concentration and toxicity above all. According to GB/T18664 "Free Selection, Application and Assurance of Defecation Protection Products", as a half mask, all dust masks are suitable for the environment where the concentration of harmful substances is not up to 10 times of the occupational recognition limit, otherwise they should be applied to the full mask or the respirator with higher waterproof level.
If the particulate matter is classified as highly toxic, carcinogenic and radioactive, the filter material with the lowest efficiency should be freely selected.
If the particulate matter is oily, be sure to choose a limited filter material.
If the particles are needle-like fibers, such as slag wool, asbestos, glass fiber, etc., the dust respirator cannot be washed, and the respirator stuck with tiny fibers will easily cause facial irritation in the sealing part of the face, so it is not suitable for use.
For the high temperature and high humidity environment, it is more comfortable to choose the mask with exhalation valve freely. The mask with ozone can be used as welding mask to obtain optional waterproof, but if the ozone concentration is lower than 10 times the occupational health standard, the mask can be replaced with dust and toxic filter elements. For the environment that does not have particulate matter, but only does not have some peculiar smell, free choice of dust mask with activated carbon layer is much lighter than wearing gas mask, such as some laboratory environment, but because of the national standard does not develop the technical performance specification of this kind of mask.

Xinxiang Jinshikang Medical Equipment Co., Ltd. is an enterprise specializing in the research, development, production and sales of medical device products. It has professional new product development capabilities and technological innovation capabilities. The company has been established for a long time. It is located in the famous "hometown of medical materials" Henan Xinxiang changyuan (now a provincial county). The company is close to the 106 National Road, connecting Shanghai and Beijing, and the Xinhe Railway Jinan (South) New Township) High-speed through the east and west, the entrance and exit are close to the factory area, the traffic is developed, the outstanding people are the "Little Wenzhou" of the Central Plains.
The company has more than 1,000 business sales staff, rich performance, footprints all over the south, north and south of the Great Wall, unique geographical location and rich human resources, laying a solid foundation for the company's development.

The company's main products include anesthesia products and other medical materials and supplies of various specifications.

The company occupies a wide area and has a garden-like factory area. It has a 100,000-square-meter purification workshop of 5000 square meters. The company has perfect storage and convenient transportation. "Focus on life, treat oneself as oneself, continue to improve, keep improving" is the company's quality policy. "Caring for life and caring for health" is our consistent code of conduct and has established a good corporate image and reputation in many medical institutions.

In order to further strengthen its scientific research strength, it entered the field of bioengineering. Guided by customer needs and customer satisfaction, we continue to advance towards higher goals through continuous improvement and innovation of technology and management. We are determined to be a loyal guardian of human health with the help of friends and colleagues from all walks of life. .